Wood Tags Three Ways

You might have realized by now that I’m always on the lookout for simple handmade gift ideas that I can recreate for a fraction of the cost. In fact, you can find a whole series on handmade gifts here.

I think homemade gifts are fun to give (and get!) because there’s a little bit of you in the gift – not only money, but time and thought as well.

So when I saw these recent offerings at two of my favorite sites, Decor Steals (left) and Ballard Designs (right) I thought they’d make fun and super simple gifts!

Besides these two ideas, I had one of my own (crazy, I know) that I’m sharing along with a tutorial on making your own wooden tags from scrap wood or inexpensive pine. After making the plain wood tags, all that’s left is choosing which of the three ways to finish them. Of course, you can also throw caution to the wind and try all three!

And do you think they will be anywhere near the price of $28.50 + $5 shipping for the distressed number tags on the left above? Or $15 + shipping for the beverage tags on the right?

Um, not even close. In fact, I had scrap wood, black paint, garden twine, a sharpie and number stickers already, so it actually didn’t cost me anything.

OK, I guess I did have to buy the stuff at one point, didn’t I? My point is, this is a pretty inexpensive gift – a couple dollars and a nice wrapping job = a great gift. One I’d like to get – in fact, I’m even keeping some of mine!

Warning: this is a bit long, but I’ve put the tutorials in collage form so that you don’t have to scroll too far down.

To create the plain wood tags:Make the tags using scrap wood or purchase lattice or lath pieces from a home store. They are about 1-1/2″ wide x 1/4′ thick.

1. Use a miter saw (or miter box with a hand saw) to cut the wood into 3-4″ lengths (mine average 3-1/2″). Tip: have the blade running before touching the wood and then cut slowly.
2. Using a shipping tag as a guide, trace the angles with a pencil.
3. Set the miter saw at a 45 degree angle and cut off the corners at the marks.
4. Drill a hole in the top using a large enough drill bit to put jute twine though later.
5. Sand the edges using 150 to 220 grit sandpaper.

Now that you’ve got a nice stack of wood tags, it’s time to decide how to finish them.

Option 1: Distressed Wooden Hanging Numbers

To create distressed number tags:

1. Gather black spray paint, prepped wooden tags, and number stickers in the font of your choosing (There are a number of ways to do this, actually – you could use a stencil and paint white numbers or paint black numbers on the bare wood. I chose this because it seemed the quickest way to get the muted, worn look I was after).
2. Attach stickers to tags.
3. Lightly spray two to three coats of flat, black paint, being careful to get all the edges.
4. Let dry and remove stickers.
5. Sand the tags using 220 grit sandpaper.
6. Spray both sides and all the edges with a clear, satin sealer, let dry and thread with jute twine.

Need some ideas about where to use these number tags?

• On flower pots or vases. Line up 3 or 5 in a row with the same flower for a beautiful centerpiece or porch decor.
• Hang on baskets.
• Use to label clipboards.
• Put them around mason jars used for storage.

Option 2: Beverage Tags

To create beverage tags:

1. Transfer an ink-jet printed word onto the tags: type the words into a word-processing program in the font of your choice (I used Brush script, sized to 44 and 40 for the longer words); reverse or flip the image (I used Preview on my Mac to take a screen shot, flip and print with no constraints); place the printed word on tag, ink-side down, and lightly damped the paper with a cloth.
2. Burnish the image with the end of a Sharpie pen, being careful not to tear the paper. Lift off. AND when that doesn’t work so well…{a-hem}
3. Take the sharpie and trace over the outline. OR simply use the sharpie in the first place, writing in your own handwriting OR use this old-time method I used to transfer a monogram onto wood.
4. Let them dry thoroughly and then coat the tags with Mod Podge (do not use the spray sealer – it will make the marker bleed). I’ve read that spraying the wood with hairspray before using the marker will also help with bleeding…but I didn’t do that, so I do have a bit of bleeding.

For these tags, thread them with longer pieces of jute twine – about 14″ doubled over – to leave long enough ends to be able to tie around pitchers.

Option 3: Chalkboard Tags

I actually shared how to make these chalkboard tags at The Happy Housewife a few weeks ago. Head over there to read the three steps needed (after making the plain wood tags) to make these super-easy tags that can be used for so many things.

I discovered a little secret while making these that you’ll want to know, I’m sure (hint: it has to do with the paint).

So, if you’ve read this far, I’m going to assume you want to make some version of these tags, so tell me – which will you make and how will you use them? Will they be a gift for someone? Or will you keep them yourself?

Yeah, like I am.

This is linked to Saturday Nite Special, Weekend Wrap-Up and Tutorials & Tips Link Party.

Share and Enjoy